TEL: +86-13802247168    E-Mail: sales@esunq.cn
 
The attentions for safe use of wire harness assembly machine
 2023-10-21  426

Wire harness assembly machine is a very intelligent harness assembly equipment, which can automatically handle the whole process of wire harness assembling. During the operation of the wire harness machine, if the machine is abnormal, please turn off the power supply and invite maintenance personnel to repair and debug in time. During the operation, the power supply of the machine has been cut off, and any part of the finger or body is strictly prohibited from entering the drilling area to avoid accidents.

wire harness assembly machine

Automatic wire harness assembly machine


Automatic terminal crimping machine

Safe use of wire harness assembly machine.

When replacing the terminal of the wire harness machine, the power supply should be disconnected first, and then the replacement operation is strictly prohibited. During operation, if the terminal plate of the mold is stuck, use scissors or needles to remove it and continue to work. Therefore, the manufacturers of wire harness intelligent assembly terminal machines say that selecting high-quality wire harness intelligent assembly terminal machines can greatly improve efficiency.


Automatic terminal crimping machine

Before starting, check whether the wire harness machine is stable and flat, and whether the mold is installed and fixed. Whether the pedal socket and power socket are secure, whether the fixed terminal coil and terminal circuit are in the normal position, whether the fastener is loose, and whether the debugging wrench has been removed. Adjust the press height and test the press manually according to the direction of rotation. When adjusting the mold and tool holder, the power must be cut off for debugging.


Automatic terminal crimping machine

When the wire harness machine is working, it is forbidden to stand in front of the machine to prevent people from being hurt by flying knives. In case of failure of emergency equipment, the power supply must be cut off quickly, professional maintenance personnel should be invited to carry out maintenance and shall not be dismantled by themselves. When the blade is lowered, the depth of entering the cutting groove must not exceed 2mm, and the blade must not contact with the cutting groove. After turning off the computer, turn off the power switch and put away the adjustment tool.


Automatic terminal crimping machine

In the production and processing process of using wire harness intelligent machine, the use of cutting tools is very important. In the cutting process, the vibration of the tool is mainly manifested as the vibration phenomenon when the length is long and the workpiece is thin. In the process of high-speed cutting, a lot of noise will be produced, and it will also cause harm to the human body. The correct and rational use of this kind of wire harness intelligent assembly terminal machine can greatly reduce noise and vibration.

Consult Now:+86-13802247168 Consulting

Online Service >

Contact Us
WhatsAppWhatsApp

Sales Tel

+86-13802247168

E-mail:sales@esunq.cn

WhatsApp

WhatsApp