TEL: +86-13802247168    E-Mail:
Advantages of terminal crimped by automatic equipment JMK
 2023-02-25  203

Terminal market demand is rapid increasing with the continuous expansion of the scope of application of terminal machine, they are also becoming more and more important in circuit manufacturing. The use of fully automatic terminal machine can not only automatically strip the wire, but also improve work efficiency, reduce manual labor, avoid the waste of human resources, and create more wealth for enterprises.

Automatic Terminal Crimping Machine

Let's talk about the advantages of terminals used in fully automatic terminal machines:

No matter which connection method the terminals are, they all have the following advantages.
1.The welding needle is copper alloy, and the welding needle has no dirt to guarantee the long-term reliability of welding.

2. The wire clamp shell is mechanically decoupled from the solder needle, that is, because the wire clamp shell is not connected with the solder needle, the torque when tightening the screw will not be transferred to the solder joint.

3. The end of the welding needle is shortened and thinner, so it is easy to install.

4.With heat dissipation channel.

5.Tinned solder needle, easy to weld.

6. Large wire processing capacity, can be used to all kinds of wiring requirements.

7. The welding needle is quadrangular, and the end is shortened and thinned. When piercing into the welding hole, random transformation can be prevented.Use the solder fluid to dissolve into the weld hole.

Automatic Terminal Crimping Machine

How to choose terminal for terminal crimping machine?

Users can not only choose different parameters of the terminal machine according to their needs, such as needle position, needle distance, etc., but also choose different wiring directions.In practical use, the planning of components (such as the orientation of the PCB in the housing) often constrains the printed circuit board terminals.
It is undoubtedly of great practical significance to supply a variety of printed circuit board terminals with different wiring directions: horizontal, straight, bevel, and front.
The more choices you provide, the greater the assistance to practice.Printed circuit board terminals can even be supplied to multi-layer wiring (layer 1 to layer 4) terminals (MKDS...To MK4DS..).The arrangement between the layers is very compact and half the needle distance is staggered in the straight direction.

This kind of terminal fully meets the description requirements of compact planning and space saving. The terminal of the screw connection method is compatible with that of the spring connection method. The so-called compatibility means that the two can be exchanged without changing the planning of the printed circuit board. This greatly increases the habit of the product and reduces the cost to a great extent.

Consult Now:+86-13802247168 Consulting

Online Service >

Contact Us

Sales Tel