Wire harness assembly equipment is kind of automatic harness processing center, which can complete the whole process of terminal crimping, connector insertion. It has comprehensive functions, including wire entry, tangent peeling, terminal crimping, sheath and connector insertion, so it has precise structure and many functional modules, but the efficiency of processing wire harness is greatly improved, and it is widely used in electronic and electrical appliance manufacturing. automobile wire harness processing and other industries.
It is precisely because of its powerful function, so the technical level of operation and maintenance is also relatively high, especially related to security matters. During the operation of the wire harness assembly equipment, if the machine is abnormal, please turn off the power supply and invite maintenance personnel to repair and debug in time. During the operation, the power supply of the machine has been cut off, and any part of the finger or body is strictly prohibited from entering the drilling area to avoid accidents.
When replacing the terminal of the harness assembly equipment, the power supply should be disconnected first, and then the replacement operation is strictly prohibited. During operation, if the terminal plate of the mold is stuck, use scissors or needles to remove it and continue to work. Therefore, manufacturers of wire harness assembly equipment say that choosing high-quality wire harness assembly equipment can greatly improve efficiency.
Before starting, check whether the wire harness intelligent assembly equipment is stable and flat, and whether the mold is installed and fixed. Whether the pedal socket and power socket are secure, whether the fixed terminal coil and terminal circuit are in the normal position, whether the fastener is loose, and whether the debugging wrench has been removed. Adjust the press height and test the press manually according to the direction of rotation. When adjusting the mold and tool holder, the power must be cut off for debugging.
When the wire harness assembly equipment is working, it is forbidden to stand in front of the machine to prevent people from being hurt by flying knives. In case of failure of emergency equipment, the power supply must be cut off quickly, professional maintenance personnel should be invited to carry out maintenance and shall not be dismantled by themselves. When the blade is lowered, the depth of entering the cutting groove must not exceed 2mm, and the blade must not contact with the cutting groove. After turning off the computer, turn off the power switch and put away the adjustment tool.
In the production and machining process of harness assembly equipment, the use of cutting tools is very important. And in the cutting process, the vibration of the tool is mainly manifested as the vibration phenomenon when the length is long, and the workpiece is thin. Also, during the process of high-speed cutting, a lot of noise will be produced, and it will also cause harm to the human body. The correct and rational use of this wire harness assembly equipment can greatly reduce noise and vibration.